|
|
The Block of Flats in Brno, Bystrc - Project Planning and Management
Šarlejová, Petra ; Štěrba, Martin (referee) ; Motyčka, Vít (advisor)
This thesis deals with the project planning and management of the construction of two houses of flats in Brno – Bystrc, Šemberova street. The houses of flats are designed as a newly built five floors above ground and one basement floor. The supporting system is made from brick ceramic blocks, underground floor is made of concrete blocks. This thesis processes technological project of building as preparation and building site equipment, use of machines necessary for implementation of the construction, monitoring and test plan, technological steps for basement walls of shuttering blocks. Finally, in this thesis dealt with time and cost of construction of houses of flats.
|
|
| |
|
|
Constructive - Technological Project of Medical Center in Vizovice
Špalková, Martina ; Lukášková, Jana (referee) ; Mohapl, Martin (advisor)
The diploma thesis is based on a project of medical centre in Vizovice. The medical centre is designed as a three-floor building with a receding top floor. Building foundations are designed from foundation pads and strips from reinforced concrete, the load-bearing masonry is designed from hollow clay blocks ZELUS, a reinforced concrete ceiling is designed as a bracing element. The medical centre is roofed by a flat roof with a PVC covering. This thesis deals with the budget and time plan of the whole construction, transport accessibility of the building, building maintenance instructions and maintenance costs for 25 years, daylighting of room number 1.32, an engineering report of construction site equipment and its drawing, a design of lifting mechanism of the site equipment, a plan for transport of concrete and concreting the floor slabs. The thesis is mainly focused on roofing of the medical centre, technological regulation for the roofing and reinforced concrete floor slabs is elaborated, as well as a control and test plan for the floor slabs from the reinforced concrete and for the roof PVC foil.
|
|
|
Implementation of Apartment House in Brno - Building Contruction Project
Pospíšil, Dominik ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
Theme of the diploma thesis is technical report of the technological project for apartment building Hroznatova – Brno - Zidenice, which will be realized on Hroznatova street. For object I prepare technical report of the technological project, studies of realization main technological phases, solution of wider transport relations, objects time and financial plan, time schedule, project for site facilities with drawing of four main technological phases, design of the main construction machines and mechanisms, technological specification for realization of horizontal monolithic reinforced concrete ceiling construction, health and safety solutions for the solved construction, where I evaluate concreting ceilings, balance of workers and main machines, inspection and test plan for constructions from technological specification. As other assignment I make a itemized budget for Etics and ceiling construction, calculation according to THU and comparative truck crane with tower crane.
|
|
|
Technological stage coarse substructure "Vinařství"
Staněk, Martin ; Štěrba, Martin (referee) ; Henková, Svatava (advisor)
The subject of this bachelor thesis is technological stage of gross substructure of winery. Part of this work is a technical report of building equipment, technological instruction for selected works, the draft of the mechanical assembly, inspection and test plans, schedule of health and safety, bill of quantities, itemized budget, the situation of the building site and the schedule.
|
|
|
Technological stage of assembly load-bearning construction of building of secondary school
Tacina, Marek ; Bravenec, Roman (referee) ; Diaz, Yvetta (advisor)
The subject of this thesis is the design of the supporting frame structures in MS-OB. Construction is divided into two phases - red and blue. Blue phase focuses on the objects A, B1, B2 and red stage focuses on objects C1, C2, D1, D2, D3. In this work it is addressed, through a technical report, the situation of buildings, building equipment, budget, schedule, technological progress in construction, design of mechanical assemblies, KZP and Safety solved the technological stage.
|
|
|
Architectural and technological project of reconstruction surgeries KPRCH University Hospital Brno
Hačka, Martin ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
The aim of this work is to prepare the implementation of the reconstruction and extension of the Teaching hospital Brno Bohunice. Implementation of major technological stages is addressed in building technological study. Work includes selected legal procedures before the start of construction work, such as opening the envelopes and investor-supplier contract for the work. Further work solution contains selected technological processes of each sub-job phases, complemented by technological regulations, proposals for major construction machinery, selected inspection and test plans. As part of my work I will work with subcontractors to perform CFA piles, so I deal with on demand system for subcontractors, notice of award, issuing orders and delivery site for subcontractors. I believe that the subject of occupational health and safety on the jobsite is an important chapter construction and will therefore address the safety and health of people at work drawing up a plan OHS and OHS coordination meetings. Work will also be supplemented by information site equipment, time and financial plans and drawings of all the individual components specified in the Annexes. The content of my work is also a doctoral student competition entitled "Modern technologies and materials", where thoughts about the implementation superaseptických surgeries new technologies. This work will be the content of the text section of the attachments, always mentioned with the name of specialization.
|
|
|
Pavilion F of the Elementary School in Šlapanice – Building Construction Project
Barák, Libor ; Venkrbec, Václav (referee) ; Nečasová, Barbora (advisor)
Theme of the diploma thesis is an elaboration of a building construction project for Pavilion F of the Elementary School in Šlapanice. This thesis deals with the engineering report for the construction technology project, the study of the implementation of the main technological stages of the building, solving broader transport relations with the design of the building supply, object time and financial plan, time schedule of the main construction object, project of the site facilities, design of the main construction machines and mechanisms for selected technological processes, technological regulation for the execution of monolithic constructions, control plan and test plan for the execution of monolithic constructions, the balance of workers and the deployment of main construction machinery and a health and safety plan for selected construction processes. In this diploma thesis, there are also construction calculation according to technological economic indicators, itemized budget of selected technological processes and formwork drawings.
|
|
|
Constructive technological project of reconstruction
Tacina, Marek ; Kopecký, Lukáš (referee) ; Diaz, Yvetta (advisor)
The subject of my thesis is to implement the gross carrying construction of the new bakery Karlovy pekarny in Židlochovice. In this paper dealt with the technical report, the situation of buildings, building equipment, budget, schedule, technological procedure of construction (bored piles and assembled skeleton), mechanical design and assembly KZP.
|
|
|
Production hall MONTGAS - realization of the gross substructure
Kurka, Jan ; Selník, Petr (referee) ; Vlčková, Jitka Laura (advisor)
The bachelor thesis deals with the realization of the gross substructure of the new production hall of the company MONTGAS a.s. in Hodonín on the street U Kyjovky. Part of this technological phase is the realization of earthworks, driven gravel FRANKI piles, driven reinforced concrete FRANKI piles, cast-in-place reinforced concrete foundation pads, sills and strip foundations, soil slab, base layers and reinforced concrete floors of the building including steel fibre reinforced concrete slab and cast-in-place reinforced concrete structure of the paint shop inside the production hall. It also includes damp proof layer and insulation of foundation structures. The content of this work is the technology of earthworks and all piles in the form of technological regulation. Construction costs are calculated in an itemized budget from student version of the BUILDpowerS software with a bill of quantities. The schedule is drawn up in the form of a schedule from student version of the CONTEC software. Plans are in place to ensure both quality and safety during construction.
|
guest ::
